新灰泥涂抹机 Małek M-5 Max 230V/400V w systemie modułowym

M-5 MAX 230V/400V PLASTERING MACHINE

Our offer includes plastering machines used for mortar feeding, distinguished by high quality and careful workmanship, and above all reliability, which is extremely important in the construction industry, due to tight work schedules, among other things.

The proposed devices have the appropriate approvals and CE certificates. In response to customer expectations, we create solutions that meet the requirements, always putting accuracy and the highest standards first.

Choosing our plastering machines guarantees efficient and uninterrupted work. Choose the model that works best for your business. Each of the proposed machines has different specifications, so carefully reading the information will allow you to select the optimal device that will meet your requirements and expectations. Below we present the most important information about the M-5 MAX 230V/400V plastering unit model in a modular system.

PURPOSE OF THE AGGREGATE IN THE MODULAR SYSTEM

The M-5 MAX 230V/400V plastering aggregate is designed for the mechanical feeding of mortars with a grain size of up to 3 mm (suitable for mechanical feeding according to the manufacturers' recommendations), such as:

gypsum plaster
gypsum-lime plaster
cement
lime plaster
lime-cement plaster
masonry mortar
soundproofing plaster
joint mortar
reinforcement and adhesive mortar
machine-applied screeds
adhesives, lime finishes
anhydrite screeds
other
The aggregate tank can be filled with bagged material or through a feed or blow-through cover.

The MODULAR SYSTEM consists of:

mobile trolley (bottom of the unit)
unit basket – material hopper
unit funnel
motor base
compressor
Basic unit equipment

feeder gear motor 0.61 kW 25 rpm 230V/400V
feed pump gear motor 6.05 kW S3-60% 350 rpm 230V/400V
PKM60 water pump 0.55 kW 230V
D6–3 pump unit stator + rotor
air compressor 0.9 kW 250 l/min, pressure 5.5 bar
cleaning unit – shaft and cleaner
socket wrench for screwing in the rotor
cleaning ball for working hose, diameter 30 mm
water meter 150–1500 l/h
working hose DN25 10 m with camlock couplings
¾" reinforced water hose, 25 m, pressure fitting and fitting with connector
3/8" reinforced air hose, 12.5 m, 2 x fitting with connector
5x 2.5mm2 power cord, 20 m, terminated with a 5B PCE 32A plug
75 cm spray lance with Ø 12 nozzle
spray gun scraper
key for unscrewing the water reducer glass
mixer
DN25 pump yoke male camlock connector type D
spray gun for producing water mist
adapter for M-5 Max 400V 5P/230V 2P+PE 10mb plastering unit.
Additional equipment for the unit

working pressure gauge with plaster separator 100 bar DN25
plastering unit cover
42V measuring probe
various types of spray gun nozzles: pink, black, black conical, and various sizes: 8, 10, 12, 14, 16, 18
lance tubes of various lengths: 25 cm, 75 cm, 100 cm, 125 cm, 150 cm
pump yoke for DN35 type D spouts
pump yoke for DN35 type R spouts
DN25 pump yoke male camlock connector type R
35 mm hose for spouts
working pressure gauge with separator for 100 bar DN35 spouts
rotomix type D DN35/25
Rotomix type R DN35/25
Tarpaulin - cover for plastering unit
Control button with cable of various lengths: 12 m, 20 m, 30 m
Extension for M-5 unit, original Małek 96 liters
THE WARRANTY IS VALID FOR 12 MONTHS.

Main components of the unit

The components that can be removed from the unit if necessary (also for transport) are:

compressor
mixing chamber with mixing pump
feeder wheel
feeder wheel cover
feed chute
unit basket - material hopper
The weight of the unit with all main components is 264 kg.

Advantages of the M-5 MAX 230V/400V Plastering Aggregate in the MODULAR SYSTEM

built-in AUTO/0/HAND water pump switch
control of mixture reversal at reverse speed in case of mixture blockage
the electrical box is assembled on EATON components
the machine has a built-in phase reversal and sequence sensor
feed height 950 mm
tank capacity approx. 150 l
maximum discharge pressure 40 bar
maximum delivery distance 40 m
possibility of connecting a silo
possibility of connecting a remote control for the unit
possibility of connecting a gun for facade finishing and garage systems
possibility of disassembly into individual components: trolley (bottom of the unit), material hopper, unit funnel, motor base, compressor
smooth speed control at 230V
possibility of switching the power supply from 230V to 400V
built-in additional 230V socket
The machine is equipped with a button that allows the mixture to be reversed in case of a blockage in the hoses.

It also has a phase failure and phase sequence sensor.

The M-5 MAX 230V/400V unit comes with:

3/4" water hose 25m 10 bar
3/8" air hose 12.5m 15 bar
DN25 working hose 10m 40 bar
5x 2.5 -20m power cord with 5B PCE 32A plug
75cm spray lance
gun scraper
key for unscrewing the water reducer glass
key for screwing in the rotor
cleaner
mandrel
mixer
cleaning ball fi 30 x 2
water spray gun
Pk60 0.55 kW 230V water pump
Handy K2 Koellmann 250 l/min compressor
DN25 yoke male camlock connector
adapter for M-5 Max 400V 5P/230V 2P+PE 10mb plastering unit.