路面划线机 Hofmann H26-3 Airspray 1k

Universal road marking machine HHOFMANN type H26-3 – for applying monocomponent airspray paint
Compact, narrow and manoeuvrable universal marking machine with high capacities for high-capacity marking jobs, consisting of:
- hydraulic actuation, infinitely variable speed, acts simultaneously as brake, speed
- 0-20 Km/h with 2 travel speeds (hydraulic motors have 2 travel speeds)
- front chassis composed of two parallel frames
- multidisc electro-hydraulic parking brake
- Kubota Turbo Diesel 4-cylinder engine, 3800 cm³, water cooling and electric start, 55.4 kW (75HP) at 2200 rpm, soundproof,
- mechanical steering box, hydraulically assisted, with front axle steering
- screw compressor 2400 l/min. at 7.5 bars
- fuel tank with level indicator, capacity 150 liters, located in the safety area in front of the rear axle with left and right lateral filling
- hydraulic oil tank 85 liters
- alternator 100 A
- general battery switch
- multidisc electro-hydraulic parking brake
- electric pedal switch
- engine/compressor cab soundproofed and built on rubber pads to eliminate chassis vibrations
- operator and attendant seats mounted on a shock absorption system and movable left/right, including armrests
- control panel painted in gray RAL 7040
- the steering wheel can be moved to the left or to the right
- microbial tank: 2 x 160 liters with left/right shut-off valves, working pressure max. 3 bars
- control panel for the air unit located within the operator's reach
- marker with sliding support with the possibility of marking on the right, left and central side of the car
- front chassis composed of two parallel frames
- hydraulic equipment 15+8+8 cm³
- guidance indicator (feeler) with hydraulic cylinder for lowering/raising
- TRANSLATOR + SUPPORT mounted on the rear axle
• PAINT TANK, total capacity 650 liters
- tank designed to work under pressure
- agitator with hydraulic actuation
- washing system with galvanized tank of 20 liters, under pressure
- primary paint filter located after the tank exit
• MARKING UNIT, with variable sliding system, with the possibility of sliding on the right, central or left side of the machine, depending on the type of marking applied, with support with rubber wheel and lifting cylinder, composed of:
- AIRSPRAY PAINT GUN complete with nozzles 6 mm paint nozzle, 9 mm air nozzle and mold nozzle = 2 (two) pieces
- PEARL REFLECTIVE TRACK + ASSEMBLY KIT = 2 (two) pieces
- Manual gun L= 50 cm for monocomponent paint application with 10 m hose set
• SOLENOID VALVE – 2 pcs.
• FAN DRIVEN by a proportional hydraulic motor
The cooling unit is equipped with automatic adaptation of the fan speed depending on the ambient temperature and the demand of the equipment:
- reduction of the noise level during normal operation
- high cooling capacities at extreme demands of the equipment
• AUTOMATION SYSTEM type ELC-4: TFT display with a resolution of 800 x 480 pixels can control 3 guns and store 12 programs, distance between pulses 1 cm, work cycle up to 100m, automatic, semi-automatic, working mode manual, liquid crystal speedometer indicator, line length meter, forward/reverse recognition, pedal.
• 12V electrical equipment, beacon
• Folding rear platform
• Sun visor
• Front eye