新汽车千斤顶 TyreON TPH35T-1 Air hydraulic jack 35 Tons

Capacity 35T Heavy duty air jack
1-stage jack 35T
Lifting height 36 cm - 91 cm
Model Long chassis - Long bar
Weight - Total length 86 kg - 201 cm
Application Intensive commercial use
Delivery includes Extensions 50 + 100 + 150 mm
Hydraulic oil is filled
Long chassis - Long bar
This heavy duty air jack with a minimum height of 36 cm and a lifting height of 91 cm is used in the construction, earthmoving and agricultural sectors.
This Pneumatic air jack is also suitable for vehicles with high axles.
CE approved: EN 12100:2010 Safety of Machinery + EN 1494:2000+A1:2008 Mobile or Moveable Jacks
Metal shrinks or expands due to temperature differences, our heavy duty air jacks will not fail at low or high temperatures.
The pneumatic air jack has undergone load testing at -25 ° C to + 45 ° C, and static and dynamic off-center load safety tests have also been passed.
The handle locks in 3 positions; 45º-90º and 180º.
The cylinders are chrome-plated internally and externally and resistant to wear and corrosion.
Each cylinder is equipped with 2 industrial seal rings to prevent oil- escape.
This Pneumatic air jack with 1 heavy-duty piston uses 8-12 Bar compressed air to lift loads up to 35,000 kg. TyreON Heavy duty air jacks are easy to operate and have many safety options, such as a joystick with dead man's control that also controls an evenly slowed fall.
TPH35T-1 Heavy duty air jack
TyreON TPH35T-1 H
eavy duty air jack 
- Functions and & Safety
Dead man's control
- When the hold-to-run joystick is released, the pneumatic air jack switches off and comes to a stop immediately
Pressure relief valve
- Prevents damage to the heavy duty air jack if the load is too heavy
Evenly lowered load
- A pressure reducing valve ensures an evenly slowed down, even with the heaviest load
Fast lifting
- Thanks to the pneumatic high pressure pump
Accelerated to the load
- System to bring the cylinders to the load in an accelerated manner and also to lower the jack without load
Solid chassis
- Made of thick sheet steel, ultimate protection of the pneumatic high pressure pump and other internal parts
Oil circulation
- If, for example, the pneumatic air jack comes to lie on its side, no oil will escape
Fixed position and evenly loaded lifting
- Non-return valves guarantee a fully fixed position with loads at all heights and a controlled uniform lifting speed under load
 
TPH35T-1 Air hydraulic jack 35 Tons