Machineryline » 备件 » 备件 Schunk Bosch Rexroth Case Caterpillar Hitachi JCB John Deere Komatsu Liebherr Rexroth Volvo » 电气系统 Schunk » 助力传动 Schunk » 助力传动 Schunk Universal Gripper PGN-plus 380-1 AS »

助力传动 Schunk Universal Gripper PGN-plus 380-1 AS

Name: 助力传动 Schunk Universal Gripper PGN-plus 380-1 AS
Brand: Schunk
SKU: 4262549322043
Price: 2529 CNY
Availability: InStock

助力传动 Schunk Universal Gripper PGN-plus 380-1 AS - Machineryline

助力传动 Schunk Universal Gripper PGN-plus 380-1 AS | 图像 1 - Machineryline

助力传动 Schunk Universal Gripper PGN-plus 380-1 AS | 图像 2 - Machineryline

对广告感兴趣？

请求提供更多照片

1/2

¥2,529

净价

€325
≈ US$376.30

通知价格变动

品牌: Schunk

型号: Universal Gripper PGN-plus 380-1 AS

类型: 助力传动

位置: 德国

Buchen6901 千米 to "United States/Columbus"

卖方库存 ID: 4262549322043

发布于: 超过 1 个月

情况

情况: 旧

更多详情 — 助力传动 Schunk Universal Gripper PGN-plus 380-1 AS

pneumatically, via filtered compressed air according to ISO 8573-1: 2010 [7:4:4]
Schunk Universal Gripper PGN-plus 380-1 AS
Stroke per jaw [mm]
Closing force [N]
Closing force (at finger length 0 mm) [N]
Minimum spring force [N]
Net weight [kg]
Recommended workpiece weight [kg]
Cylinder volume per double stroke [cm³]
Minimum operating pressure [bar]
Max. operating pressure [bar]
Nominal operating pressure [bar]
Minimum sealing air pressure [bar]
Max. sealing air pressure [bar]
Closing time [s]
Opening time [s]
Closing/opening time with spring [s]
Maximum permissible finger length [mm]
Maximum permissible mass per finger [kg]
Protection class IP
Minimum ambient temperature [°C]
Max. ambient temperature [°C]
Repeatability [mm]
Length X [mm]
Width Y [mm]
Height Z [mm]
Maximum torque [Nm]
Moment My max. [Nm]
Maximum torque (Mz max. [Nm])
Max. force axial Fz max. [N]
The full gripping force according to the data table may only be achieved after several hundred gripping cycles
Dimensions and maximum loads
The specified moments and forces are static values
apply per base jaw
and may occur simultaneously. These loads may occur in addition to the moment generated by the gripping force
General information about the model series
Gripping force
is the arithmetic sum of the individual forces acting on each jaw
at a distance P (see drawing)
finger length
The distance P is measured from the same reference surface in the direction of the main axis. The maximum permissible finger length applies up to the nominal operating pressure. At higher pressures
the finger length must be reduced proportionally to the nominal operating pressure
Repeatability
is defined as the dispersion of the final position over 100 consecutive strokes
workpiece weight
This is calculated for frictional engagement with a coefficient of static friction of 0.1 and a safety factor of 2 against slippage of the workpiece under gravitational acceleration g. Significantly higher permissible workpiece weights result from positive engagement
Closing and opening times
These are pure movement times of the basic jaws without application-specific gripper fingers. Valve switching times
hose filling times
or PLC response times are not included and must be taken into account when determining cycle times
Operating principle
Wedge gear with surface power transmission
Housing material
aluminum
Basic baking material
Steel
activity

显示整个评论

索取更多信息

重要

商品描述由卖家提供，请您直接向卖家确认所有细节。

购买提示

安全提示

卖方验证

如果您决定以低价购买设备，请确定您是与真正的卖方交流。您需要尽可能多地了解设备所有者的信息。欺骗的方式之一就是骗子声称自己是真实存在的公司。如有怀疑，请通过反馈表单通知我们，以进行进一步控制。

价格检查

在您决定购买之前，仔细检查多个商品的销售报价，了解您所选择的设备的平均费用。如果您选择的商品的价格远低于类似商品，请谨慎考虑。显著的价格差异可能表明卖方隐瞒缺陷，或企图实施欺诈行为。

如某产品价格与类似设备的平均价格差异过大，不要购买。

不要同意可疑的提供抵押和预付款购货要求。如有疑问，不要害怕确认详情，可要求卖方提供额外设备照片和相关文档，检查文档真实性，并多问几个问题。