加工中心 Samag MFZ 2-2

This 3-axis SAMAG MFZ 2-2 was manufactured in 2007, featuring a line voltage of 400V, frequency of 50 Hz, and a control voltage of DC 24 V. With a power consumption of 72kW and a weight of 700kg, it includes optional 3D data of the clamping tower. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information about this machine.
Location: DE
Type: Decagon
Number of storage locations: 100 (2x50)
Number of cassettes: 10
Cassette locations: 10
Cassette pitch: 90 mm
Max. cassette magazine speed: 8.3 min
Delay time from max. cassette magazine speed to standstill: 300 ms
Max. tool load mass: 280 kg
Max. tool weight/plastic collet: 6 kg
Max. tool weight/steel collet: 8 kg
Max. tool diameter with free adjacent locations: 160 mm
Rotation axis: 10x36
Time to change from nearest cassette (left/right): 1.5 s
Tool change on spindle, average chip-to-chip (VDI 2852), without wheel rotation: 4.5 s
Y-axis (vertical) working stroke: 500 mm
Y-axis (vertical) total stroke incl. tool change: 775 mm
Axis acceleration X/Y: 0.6 xg / 0.8 xg
Spindle unit: GMN high-frequency spindle HCS 220-16000/28
Spindle spacing: 450 mm
Sleeve diameter: 220 mm
Drive motor: 1FE1 083-4WN11-1BA2
Torque (S1): 65 Nm
Torque (S2): 74 Nm
Swivel time 180°: 4.5 s
Faceplate/counterbearing diameter: 500/345 mm
Drive/counterbearing speed (max.): 15/20 min
Mass moment of inertia: 140 kgm²
Permissible tilting moment: 8,000 Nm
Permissible tangential moment of drive/counterbearing: 10,000/5,000 Nm
Locking force of Hirth gearing at 100 bar/counterbearing: 190/175 kN
Parting angle: 3
Speed (max.): 20 min
Permissible tangential torque drive/counterbearing: 5,000 Nm
Line voltage: 400 V
Control voltage: DC 24 V
Dimensions (L x W x H): 2885 x 1095 x 1830 mm
Discharge height: 1020 mm
Gap screen: 500 μm
Filling volume: 100 l
Wastewater pump: 380 l/min at 1.6 bar
Cooling capacity: 1900 W
Min./Max. ambient temperature: 10/40 °C
Max. water outlet temperature: 20 °C
Condensation temperature: 40 °C
Refrigerant: R134a, 2 kg
Connected electrical power: 5.1 kW
Clean water tank (empty): 930 kg
Chip conveyor (empty): 450 kg
Tool storage
Axes and travel paths
Travel paths
Main spindle drive
Workpiece carrier unit
W-axis swivel unit
Workpiece holder A1/A2 axis
Swivel time 180°: 3.5 s
Faceplate/counterbearing diameter: 345 mm
Mass moment of inertia: 20 kgm
Permissible tilting moment: 3,000 Nm
Additional equipment
Cooling lubricant system (scraper belt conveyor)
Central cooling unit
Type: DK 160-V/SO