Caterpillar 330 330GC
¥555,100
履带式挖掘机
2022
984 摩托小时
中国, Shanghai
广告履带式挖掘机 Caterpillar 336GC已出售，并没有被包括在搜索内!
类似广告
Caterpillar 330 330GC
¥555,100
履带式挖掘机
2022
984 摩托小时
中国, Shanghai
Caterpillar 330
¥575,900
履带式挖掘机
2022
1,128 摩托小时
中国, Shanghai
Caterpillar 330 330GC
¥589,700
履带式挖掘机
2022
931 摩托小时
中国, Shanghai
Caterpillar 349D2L
¥541,200
履带式挖掘机
2022
2,169 摩托小时
中国, Shanghai
Caterpillar 336GC
¥589,700
履带式挖掘机
2023
1,129 摩托小时
中国, Shanghai
已出售
1/14
品牌:
Caterpillar
型号:
336GC
类型:
履带式挖掘机
制造年份:
2022
运转时数:
1,500 摩托小时
载重能力:
36,000 千克
净重:
36,000 千克
位置:
中国
Shanghai
Shanghai
发布于:
2026年1月16日
Machineryline ID:
BF49038
描述
挖掘深度:
7.19 米
卸料高度:
10.9 米
速度:
15 千米/小时
铲斗容积:
1.38 立方米
发动机
品牌:
Caterpillar C7.1
功率:
209 千瓦 (284 马力)
其他设备
铲斗
情况
情况:
旧
质保：:
6个月
更多详情
颜色:
金黄色
履带式挖掘机 Caterpillar
搜索结果:
5413 条广告
Engine Model: Caterpillar C7.1
Engine Type: Turbocharged Diesel, ACERT Technology, Electronic Control
Displacement: 7.1 L
Gross Power: 212 kW / 284 hp
Net Power: 208 kW / 279 hp
Emission Compliance: Tier 4 Final / EU Stage V.
Key Feature: Optimized for fuel efficiency with a standard Eco Mode and an efficient, lower-pressure hydraulic system.
2. Weights & Dimensions
Operating Weight: Approximately 36,000 - 38,000 kg (varies with undercarriage, arm, and bucket choice). Common weight is ~36,800 kg.
Standard Bucket Capacity: 1.38 - 1.88 m³ (1.8 - 2.46 yd³) – GP bucket range.
Maximum Reach at Ground Level: 10.9 m (with 6.02m/19'9" stick)
Maximum Digging Depth: 7.19 m (23'7") (with 6.02m stick)
Maximum Cutting Height: 10.35 m (34')
Bucket Digging Force (ISO): 209 kN
Stick Digging Force (ISO): 165 kN
3. Undercarriage
Carrier Type: Reinforced Crawler
Shoe Width Options: Standard 600 mm (24") or wide 700 mm (28") and 800 mm (32") for low ground pressure.
Track Gauge: 2,590 mm (8'6")
Ground Pressure: ~58 kPa (8.4 psi) with 600mm shoes.
Drive System: Independent high-speed travel motors.
4. Hydraulics
Hydraulic System: Cat Advanced Hydraulic System (AHS) with variable-speed fan.
System Type: Positive Flow Control (PFC) – Simpler and highly efficient for basic digging cycles.
Main Pumps: Two variable displacement axial piston pumps.
Total Flow: 2 x 300 L/min
Relief Valve Pressure: 34,300 kPa (4,975 psi)
Auxiliary Hydraulics: Optional, usually standard or high-flow circuits for attachments like hammers or shears.
5. Cab & Controls
Cab Type: ROPS/FOPS certified, spacious, and well-insulated.
Operator Interface:
Standard: Analog gauges and a bright LCD monitor for critical information.
Simple, intuitive controls – purposefully less complex than higher-tier models.
Optional: Rearview camera for enhanced safety.
Note: Advanced 2D/3D grade assist systems are typically not standard but may be offered as an option in some regions.
Climate Control: Efficient heating and air conditioning system.
Seat: High-back, adjustable suspension seat.