新水平钻机 Nodigmarket24 controlled mole 50m UM-20
对广告感兴趣?
1/19
€28,000
≈ US$29,900
≈ ¥216,400
≈ ¥216,400
品牌:
Nodigmarket24
型号:
controlled mole 50m UM-20
类型:
水平钻机
位置:
波兰 Zabrze
发布于:
2024年3月23日
Machineryline ID:
RJ18321
情况
情况:
新
远程检验
要求进行独立的技术检查
需要送货?
计算运费
重要
提供的此货物仅用于指导。更准确的信息请由卖方了解。
购买提示
The machines are produced with various hydraulic parameters. The example machine in the pictures has a tensile force of 200kN (20t) and allows pulling PE pipes up to 200mm.
The maximum length of the jacking is 60m. It also enables cracking on small asbestos, cast iron and stoneware pipes.
Execution of the controlled squeeze takes place at the execution of a small excavation, rough setting of the machine, arming the warhead with a radio probe and pilot drilling. Then, mount the expanding head depending on the diameter of the installed pipe and pull it into the ground. The whole process is done dry. Drilling polymers are used to retract the pipe over a longer distance. giving a significant slip and reducing friction when pulling.
If you have questions or interest, please contact us via the form or by phone.
Eng. Damian Sobczak
Specialist in the construction of culverts and mechatronics
Maszyny są produkowane z różnymi parametrami hydraulicznymi. Przykładowa maszyna na zdjęciach ma siłę uciągu 200kN
i umożliwia wciąganie rur PE w zakresie średnic 32-160mm.
W komplecie 30m żerdzi, agregat, głowice i uchwyty do rur.
Maksymalna długość wykonania przecisku to 50-60m. Umożliwia również wykonanie krakingu na rurach azbestowych, żeliwnych, kamionkowych oraz PVC polietylenowych.
Wykonanie przecisku sterowanego, odbywa się na wykonaniu niewielkiego wykopu, zgrubnym ustawieniu maszyny, uzbrojeniu głowicy w sondę i wykonanie przewiertu pilotażowego. Następnie zamontowaniu głowicy poszerzającej w zależności od średnicy instalowanej rury oraz wciągnięcie jej w grunt. Cały proces odbywa się na sucho. Do wciąganie rury na dłuższym odcinku stosowane są polimery wiertnicze. dające znaczny poślizg i zmniejszenie tarcia podczas wciągania.
W razie pytań lub zainteresowania proszę kontaktować się poprzez formularz lub telefonicznie.
inż. Damian Sobczak
Specjalista d/s budowy przepustów i mechatroniki